[2017 New] New Released Exam 70-698 PDF Free From the Lead2pass (61-70)

2017 June Microsoft Official New Released 70-698 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Good news, Lead2pass has updated the 70-698 exam dumps. With all the questions and answers in your hands, you will pass the Microsoft 70-698 exam easily.

Following questions and answers are all new published by Microsoft Official Exam Center: http://www.lead2pass.com/70-698.html

QUESTION 61
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.

Your network contains a single Active Directory domain. The domain contains computers that run Windows 10 Enterprise. The computers are configured as shown in the following table.

When User1 works remotely, the user fails to access shared folders on the corporate network. When User 2 and User3 work remotely, they successfully connect to the shared folders on the corporate network.
You need to ensure that User1 can connect to the shared folders without user interaction.
What should you do?

A.    Click Turn on password protected sharing.
B.    Disable Network Discovery.
C.    Modify the Profile settings of an incoming firewall rule.
D.    Run the Add-VpnConnectionTriggerApplication cmdlet.
E.    Run the New-NetFirewallRule cmdlet and specify the -Direction Outbound parameter.
F.    Run the Ncw-VpnConnection cmdlet.
G.    Run the Set-NetConnectionProfile cmdlet.
H.    Run the Set-VPNConnection cmdlet

Answer: E
Explanation:
Creating a new Allowed Firewall rule will allow the traffic to flow.

QUESTION 62
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Start of repeated scenario
Your network contains a single Active Directory domain named adatum.com.
The network contains five servers configured as shown in the following table.

All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA. The network contains a mainframe computer that is administered by using the Telnet protocol. The domain contains four client computers configured as shown in the following table.

All of the client computers run the 64-bit version of Windows.
User3 frequently accesses ShareA.
Remote Desktop is enabled on Computer4.
Your company identifies the following requirements:

– Ensure that you can test unsigned device drivers on Computer1
– Enable Credential Guard on Computer2.
– Run commands and cmdlets remotely on computer2.
– Configure User Account control (UAC) on Computer3 to prompt administrators for credentials when elevated privileges are required.
– Ensure that User1 can view and interact with a desktop session of User3.
– Ensure that User2 can use Telnet to manage the mainframe.
– Ensure that User4 can use Remote Desktop to access Computer4 remotely.

End of repeated scenario.
You need to meet the requirement of Computer1.
Which tool should you use on Computer1?

A.    BCD Edit
B.    Device Manager
C.    Bootcfg
D.    System Properties

Answer: A
Explanation:
http://www.drivethelife.com/windows-drivers/how-to-disable-driver-signature-enforcement-on-windows-10-8-7-xp-vista.html

QUESTION 63
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Start of repeated scenario
Your network contains a single Active Directory domain named adatum.com.
The network contains five servers configured as shown in the following table.

All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA. The network contains a mainframe computer that is administered by using the Telnet protocol. The domain contains four client computers configured as shown in the following table.

All of the client computers run the 64-bit version of Windows.
User3 frequently accesses ShareA.
Remote Desktop is enabled on Computer4.
Your company identifies the following requirements:

– Ensure that you can test unsigned device drivers on Computer1
– Enable Credential Guard on Computer2.
– Run commands and cmdlets remotely on computer2.
– Configure User Account control (UAC) on Computer3 to prompt administrators for credentials when elevated privileges are required.
– Ensure that User1 can view and interact with a desktop session of User3.
– Ensure that User2 can use Telnet to manage the mainframe.
– Ensure that User4 can use Remote Desktop to access Computer4 remotely.

End of repeated scenario.
You need to recommend a solution to meet the requirements of User1.
What should you include in the recommendation?

A.    Remote Access Connection Manager
B.    Remote Desktop
C.    Remote Assistance
D.    Windows PowerShell Remoting

Answer: C
Explanation:
http://www.technig.com/set-up-windows-remote-assistance/

QUESTION 64
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Your network contains a single Active Directory domain named adatum.com.
The network contains five servers configured as shown in the following table.

All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA. The network contains a mainframe computer that is administered by using the Telnet protocol. The domain contains four client computers configured as shown in the following table.

All of the client computers run the 64-bit version of Windows.
User3 frequently accesses ShareA.
Remote Desktop is enabled on Computer4.
Your company identifies the following requirements:

– Ensure that you can test unsigned device drivers on Computer1
– Enable Credential Guard on Computer2.
– Run commands and cmdlets remotely on computer2.
– Configure User Account control (UAC) on Computer3 to prompt administrators for credentials when elevated privileges are required.
– Ensure that User1 can view and interact with a desktop session of User3.
– Ensure that User2 can use Telnet to manage the mainframe.
– Ensure that User4 can use Remote Desktop to access Computer4 remotely.

You need to meet the requirement for administering Computers remotely.
Which remote management technology should you use?

A.    Windows PowerShell remoting
B.    Telnet
C.    Ps Exec
D.    Remote Desktop

Answer: A
Explanation:
You cannot administer Windows computers efficiently using telnet, use Windows PowerShell remoting.

QUESTION 65
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Your network contains a single Active Directory domain named adatum.com.
The network contains five servers configured as shown in the following table.

All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA. The network contains a mainframe computer that is administered by using the Telnet protocol. The domain contains four client computers configured as shown in the following table.

All of the client computers run the 64-bit version of Windows.
User3 frequently accesses ShareA.
Remote Desktop is enabled on Computer4.
Your company identifies the following requirements:

– Ensure that you can test unsigned device drivers on Computer1
– Enable Credential Guard on Computer2.
– Run commands and cmdlets remotely on computer2.
– Configure User Account control (UAC) on Computer3 to prompt administrators for credentials when elevated privileges are required.
– Ensure that User1 can view and interact with a desktop session of User3.
– Ensure that User2 can use Telnet to manage the mainframe.
– Ensure that User4 can use Remote Desktop to access Computer4 remotely.

You need to meet the requirement of User4.
What should you do?

A.    Install a Universal Windows Platform (UWP) application.
B.    Modify the settings of a firewall rule.
C.    Install a Windows feature.
D.    Modify the membership of a local group.

Answer: B
Explanation:
https://support.microsoft.com/en-us/help/17463/windows-7-connect-to-another-computer-remote-desktop-connection

QUESTION 66
You have a Key Management Service (KMS) host and an administrative workstation named Computer1.
From Computer1, you need to validate the activation status on a computer named Computer2.
What should you run?

A.    Get-RDLicenseConfiguration computer2
B.    slmgr.vbs computcr2 /dlv
C.    winrs.exe -r:Computer2 netdom.exe
D.    ospp.vbs /tokact:computer2

Answer: B
Explanation:
http://www.howtogeek.com/245445/how-to-use-slmgr-to-change-remove-or-extend-your-windows-license/

QUESTION 67
You have two computers named Computer1 and Computer2 that run Windows 10. On Computer1, you create a provisioning package named Package1.
You plan to apply the provisioning package to Computer2.
Which file must be applied to Computer2?

A.    Package1.icdproj.xml
B.    Customizations.xml
C.    Package1.ppkg
D.    Package1.cat

Answer: C
Explanation:
https://msdn.microsoft.com/en-us/windows/hardware/commercialize/manufacture/desktop/dism-provisioning-package-command-line-options

QUESTION 68
You have a computer named Computer1 that has the Hyper V feature enabled.
You have two virtual machines named VM1 and VM2 hosted on Computer1.
VM1 can communicate with VM2 and Compute1.
VM1 tails to connect to the Internet- Computer1 can connect to the Internet.
You need to ensure that VM1 can connect to the Internet.
What should you do?

A.    On Computer 1, modify the network settings.
B.    Enable port mirroring on VM1.
C.    Create an external virtual switch and configure VM1 to use the switch.
D.    On VM1, select Enable virtual LAN identification.

Answer: C
Explanation:
http://www.technig.com/connect-hyper-v-machines-to-internet/

QUESTION 69
Hotspot Question
A user fails to connect a mouse to a computer.
The user sends you the following output.
PS C:\> Get-PnpDevice -Class Bluetooth

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in output:

Answer:

QUESTION 70
Hotspot Question
You have three computers configured as shown in the following table.

You plan to migrate the computers to Windows 10
Which installation option should you use for each computer? To answer, select the appropriate options in the answer area.

Answer:

Once there are some changes on 70-698 exam questions, we will update the study materials timely to make sure that our customer can download the latest edition.

70-698 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDNEpqa0c1QW9JcjQ

2017 Microsoft 70-698 exam dumps (All 120 Q&As) from Lead2pass:

http://www.lead2pass.com/70-698.html [100% Exam Pass Guaranteed]